Features

The Stainless Steel Ball Valve (SSBV) and Motor Controlled Ball Valve (MCBV) are increasingly popular for industrial refrigeration due to their smooth operation and minimal pressure drop.

This patented ball valve design features stainless steel construction, very low pressure drop, gradual opening/closing, and an extended valve neck for simple insulation. These designs allow you to choose a standard motorized F05 actuator mount for the MCBV.

• Motorized and manual options
• -70°F to +240°F 
• ISO F05 Actuator Mounting Standard
• Available for flanged or weld inline installation
• Lock-out/tag-out option
• Compatible with all common refrigerants (NH3, CO2, halocarbons)

Features

The SSLL See-Switch refrigerant float switch is primarily for high level cut-out, operating level, or low-level cut-out. This stainless steel float switch is also for the control of flow and liquid level of refrigerants and other liquids in industrial refrigeration systems.

Also Available: Model SSLLS which has additional lower side-connection: 4″ below primary connection.

• FTP or buttweld connection available
• 3/4″ port size
• Visible neon yellow indicator wand clearly shows switch position
• DIN connection and 1/2″ conduit
• Tested for over 1,000,000 cycles

Features

The SCV is a refrigeration check valve for weld inline installation. Constructed of stainless steel, it is designed to prevent the reverse flow of refrigeration liquid or gas. 

• 304L stainless steel construction requires no gaskets
• Can be welded directly in-line
• Available for socket, butt-weld, or ODS connections

Features

The CK4t is an in-line refrigeration check valve. Constructed of stainless steel, it is designed to prevent the reverse flow of refrigeration liquid or gas.

• 316L stainless steel construction
• Close couples to flanged control valves without need for male adaptor ring
• Available for 3/4″ to 2 1/2″ pipe size
• For ammonia, CO2, heat transfer fluids, and other approved refrigerants
• Hardware is included with kit order

Features

Often located in high traffic areas, misused, and overlooked because of their small size, gauge valves need to endure the same challenges as the largest refrigeration valves. The SGV Stainless Steel Gauge Valve from HANTEMP Controls provides strength, durability, and unmatched corrosion resistance. Unlike most existing gauge valves, the SGV blow-out proof stem design is also back seating for servicing. The SGV is designed for simple maintenance with wrench flats on the valve body and a seal cap that is easily removed via fingers or a wrench. It is designed with long-lasting stainless to stainless seating to guaranteed tightness, and has been approved for compatibility with all common refrigerants including ammonia, CO2, and secondary refrigerants. 

• Avoids ordinary steel’s vulnerability to corrosion and low temperature embrittlement
• Seal cap removable with fingers or wrench for stem opening and closing
• Included seal cap lanyard
• Available as standard extended neck body (SGV) or compact body (SGVC)

Features

Our stainless steel flanges, flange kits, and flange unions are made to withstand low temperatures and corrosion. These flanges are a safe, low maintenance option for industrial refrigeration.

• Available from 1/2″-3″ pipe sizes
• Butt weld, socket weld, ODS, or NPT threaded connections
• Companion flange kits includes: pair of male tongue flanges, gasket, stainless steel mounting hardware
• Flange union kits include: 1 male tongue and 1 female groove flange, stainless steel mounting hardware
• All models are built to schedule 40. Please contact sales if a different pipe schedule is required

For kits with dissimilar flanges, specify when ordering (e.g. SK-100-W10-B14)

Size and terms information