Features

An oil filter should always be used with any oil management system to ensure that refrigerant oil is clean of any foreign matter that may obstruct float valves in oil regulators and oil separators.

• Welded and brazed design for higher strength
• Nitrogen tested for cleanliness
• Good for all oil types
• Powder paint finish

Specifications

• Low pressure drop filter. Replace at 15 PSIG pressure drop
• 99.5% efficient at removing 4-micron particles and larger
• 330 sq. in. of filtering surface area
• 8 cu. in. XH-9 desiccant in F(H)3-01 and F(H)3-01 models
• 3/8″ flare and 3/4″ swivel connections available

Features

An oil filter should always be used with any oil management system to ensure that refrigerant oil is clean of any foreign matter that may obstruct float valves in oil regulators and oil separators.

• Serviceable filter element with tapped and slotted flange for ease of assembly and removal
• Filter (Model 90-007K) factory installed
• Can be mounted vertically or horizontally
• Steel construction with powder paint finish

Specifications

• Low pressure drop filter. Replace at 15 PSIG pressure drop
• 99.5% efficient at removing 4-micron particles and larger
• 330 sq. in. of filtering surface area

Features

Oil Strainers are designed to operate in the high and low pressure locations of an oil management system. To prevent dammage to float needle valves and compressors, an oil strainer should be installed in the oil return line between the oil reservoir and oil level regulator.

• Suitable for use with HFC and HCFC refrigerants and their associated oils.
• Allowable operating temperature: -40°F  to 300°F (-40°C to 149°C)