Logo2

High Pressure Conventional Separators

Maximum Working Pressure - 675 psig

Description

Our standard screen style separators remove oil from refrigerant gas using three methods: velocity reduction, filtering through screens and baffling. All separated oil is then returned to the compressor crankcase or reservoir by an internal oil float valve.

Select an oil separator based on the system's tonnage under normal operating conditions. This is the capacity or compressor(s) BTUs based on the refrigerant gas at the saturated suction and condensing temperatures of the operating system. For selection purposes, select an oil separator with the nearest capacity to the system's load at the evaporating temperature.

For refrigerants and conditions not listed, see our sizing calculator or contact Westermeyer Industries for assistance.

Features

  • Welded design for higher strength
  • Nitrogen tested for cleanliness
  • Powder paint finish

All capacities shown for R-410A are based on 100°F condensing temperature.

 Catalog NumberODS Conn. SizeDimensionsMax. Capacity in
Tons of Refrigeration
Precharge
Amount (oz.)
ABR-410A
+40°F
Sealed Units OSH4-02 1/4 4" 8.25" 2.5 15
OSH4-03 3/8 4" 8.25" 2.5 15
OSH4-04 1/2 4" 10.25" 3 15
OSH4-05 5/8 4" 14.25" 10 15
OSH4-07 7/8 4" 17.75" 16 15
OSH4-11 1-1/8 4" 21" 21 15
OSH4-13 1-3/8 4" 21" 23 15
OSH6-11 1-1/8 6" 15.38" 25 40
OSH6-13 1-3/8 6" 15.38" 27 40
OSH6-15 1-5/8 6" 18.63" 35 40