Logo2

High Pressure Centrifugal Oil Separators

Maximum Working Pressure - 675 psig

Description

High pressure centrifugal oil separators are designed to remove large quantities of oil at a wide range of operating capacities. Field tests have shown these oil separators are up to 99% effective—even in high oil loading conditions. For screw compressor applications, a high pressure oil separator/reservoir without internal float valve must be used.

Select an oil separator based on the system's tonnage under normal operating conditions. This is the capacity or compressor(s) BTUs based on refrigerant gas at the saturated suction and condensing temperatures of the operating system. For optimum sizing, select an oil separator with a capacity closest to the system's load at evaporating temperature. Minimum tonnage is 30% of the rated capacity. For refrigerants and conditions not listed, see our sizing calculator or contact Westermeyer Industries for assistance.

All Sealed Units come with a 3/8 Flare for the oil outlet

Features

  • Welded design for higher strength
  • Nitrogen tested for cleanliness
  • Powder paint finish

All capacities shown for R-410A are based on 100°F condensing temperature.

 Catalog NumberODS Conn. SizeDimensions (in)Max. Capacity in Tons of RefrigerationMaximum Discharge (CFM)Precharge Amount (oz.)
R-410A
ABCD+40°F
Sealed Units OSH4-04C 1/2 4 13 3 3.5 3 1.5 15
OSH4-05C 5/8 4 15 3 3.5 10 5 15
OSH4-07C 7/8 4 17 3 4 16 7.5 15
OSH4-11C 1-1/8 4 19 3 4 21 10 15
OSH6-13C 1-3/8 6 15 4.5 5 27 13 40
OSH6-15C 1-5/8 6 17 4.5 5 35 17 40